Logged offToll free : 1 888 344-4424FR

×

Home - Scope of Application - Partial Frameworks - Pouring the models / Articulating - Air Quality - Boxing-up and prepping

WonderFormer

Dental Creations

Product number : WON400

You must logon or create an account to see our prices

Produce an accurate model in five minutes or less with Wonderformer. This one size fits all stainless steel former is easy to use and versatile! Wonderformer features a latch for quick removal of the cast model and it can be spread open widely when needed for an extra large castings. The divider can be used when pouring partial models.

  • No wax products
  • Must have for pouring implants & appliance retained impressions!
  • Works with all laboratory, orthodontic and general dentistry applications
  • Works with any casting material, stone, silicone, and rubber-based products
  • Results in a superior quality model in less time
 
 Includes 1 moud, 1 divider, instructions  


Instructions:

1. Remove approximately 10 ounces of the pre-mixed Wonderfill® and flatten out about one-half inch thick into an approximate 5 inch diameter base pad on a 5″ x 5″ plastic or glass base plate.

2. Insert tray with impression. The impression material can be of any type of product on the market today. Firmly press down the tray with impression material into the Wonderfill® base pad.

3. The Wondformer is positioned similar to that of a cookie-cutter and then firmly pressed down. There is no need to feather the outer perimeter with wax beading or heated wax.

4. Peel away the excess material from around the outside perimeter of the Wonderformer. The excess can be used with the next casting.

5. Move the base plate to the vibrator and pour in the liquid cast material. The Wonderformer does not split open while the cast material cures.

6. When the casting material is cured, remove the finished mold. Then only minimal trimming is needed.




Do you also need ?

Complementary product